Send Message with Quriiri API on New event when the content of the URL changes. from HTTP / Webhook API

Pipedream makes it easy to connect APIs for Quriiri, HTTP / Webhook and 2,500+ other apps remarkably fast.

Trigger workflow on

New event when the content of the URL changes. from the HTTP / Webhook API

Next, do this

Send Message with the Quriiri API

No credit card required

▶

Watch us build a workflow

8 min

Watch now ➜

Trusted by 1,000,000+ developers from startups to Fortune 500 companies

Developers ♥ Pipedream

Getting Started#

This integration creates a workflow with a HTTP / Webhook trigger and Quriiri action. When you configure and deploy the workflow, it will run on Pipedream's servers 24x7 for free.

Select this integration
Configure the New event when the content of the URL changes. trigger
1. Connect your HTTP / Webhook account
2. Configure Watching timer
3. Configure HTTP Request Configuration
4. Configure Emit body only
5. Configure Emit as array
Configure the Send Message action
1. Connect your Quriiri account
2. Optional- Configure Sender
3. Optional- Select a Sender Type
4. Configure Destination
5. Optional- Configure Text
6. Optional- Configure Data
7. Optional- Configure UDH
8. Optional- Configure Batch ID
9. Optional- Configure Billing Reference
10. Optional- Configure Delivery Receipt URL
11. Optional- Select a Delivery Receipt Type
12. Optional- Configure Flash
13. Optional- Configure Validity
14. Optional- Configure Schedule Time
Deploy the workflow
Send a test event to validate your setup
Turn on the trigger

Details#

This integration uses pre-built, source-available components from Pipedream's GitHub repo. These components are developed by Pipedream and the community, and verified and maintained by Pipedream.

To contribute an update to an existing component or create a new component, create a PR on GitHub. If you're new to Pipedream component development, you can start with quickstarts for trigger span and action development, and then review the component API reference.

Trigger#

New event when the content of the URL changes. on HTTP / Webhook

Description:Emit new event when the content of the URL changes.

Version:0.0.2

Key:http-watch-url

View on GitHub

HTTP / Webhook Overview#

Build, test, and send HTTP requests without code using your Pipedream workflows. The HTTP / Webhook action is a tool to build HTTP requests with a Postman-like graphical interface.

Point and click HTTP requests

Define the target URL, HTTP verb, headers, query parameters, and payload body without writing custom code.

$A screenshot of Pipedream's HTTP Request Configuration interface with a GET request type selected. The request URL is set to 'https://api.openai.com/v1/models'. The 'Auth' tab is highlighted, indicating that authentication is required for this request. In the headers section, there are two headers configured: 'User-Agent' is set to 'pipedream/1', and 'Authorization' is set to 'Bearer {{openai_api_key}}', showing how the OpenAI account's API key is dynamically inserted into the headers to handle authentication automatically.$

Here's an example workflow that uses the HTTP / Webhook action to send an authenticated API request to OpenAI.

Focus on integrating, not authenticating

This action can also use your connected accounts with third-party APIs. Selecting an integrated app will automatically update the request’s headers to authenticate with the app properly, and even inject your token dynamically.

Pipedream integrates with thousands of APIs, but if you can’t find a Pipedream integration simply use Environment Variables in your request headers to authenticate with.

Compatible with no code actions or Node.js and Python

The HTTP/Webhook action exports HTTP response data for use in subsequent workflow steps, enabling easy data transformation, further API calls, database storage, and more.

Response data is available for both coded (Node.js, Python) and no-code steps within your workflow.

Trigger Code#

import http from "../../http.app.mjs";
import hash from "object-hash";
import { DEFAULT_POLLING_SOURCE_TIMER_INTERVAL } from "@pipedream/platform";

export default {
  key: "http-watch-url",
  name: "New event when the content of the URL changes.",
  description: "Emit new event when the content of the URL changes.",
  version: "0.0.2",
  type: "source",
  dedupe: "unique",
  props: {
    http,
    timer: {
      type: "$.interface.timer",
      label: "Watching timer",
      description: "How often to watch the URL.",
      default: {
        intervalSeconds: DEFAULT_POLLING_SOURCE_TIMER_INTERVAL,
      },
    },
    httpRequest: {
      type: "http_request",
      label: "HTTP Request Configuration",
      description: "HTTP Request Configuration",
      default: {
        method: "GET",
      },
    },
    emitBodyOnly: {
      label: "Emit body only",
      description: "If set as true the emitted item will contain only the response body, otherwise, it will include the request status code.",
      type: "boolean",
      default: true,
    },
    emitAsArray: {
      label: "Emit as array",
      description: "If the request responds with an array, this source will emit changes individually for each item of the array.",
      type: "boolean",
      default: false,
    },
  },
  methods: {
    getMeta(data, status) {
      if (this.emitBodyOnly) {
        return data;
      }
      return {
        data,
        status,
      };
    },
    emitArray(event, response) {
      if (!Array.isArray(response.data)) {
        return this.emitAny(event, response);
      }
      for (const item of response.data) {
        const meta = this.getMeta(item, response.status);
        this.emit(event, meta);
      }
    },
    emitAny(event, response) {
      const meta = this.getMeta(response.data, response.status);
      this.emit(event, meta);
    },
    emit(event, meta) {
      const ts = event.timestamp || Math.round(Date.now() / 1000);
      this.$emit(meta, {
        id: hash(meta),
        summary: `Requested at ${ts}`,
        ts,
      });
    },
  },
  async run(event) {
    const response = await this.httpRequest.execute();
    if (this.emitAsArray) {
      this.emitArray(event, response);
    } else {
      this.emitAny(event, response);
    }
  },
};

Trigger Configuration#

This component may be configured based on the props defined in the component code. Pipedream automatically prompts for input values in the UI and CLI.

Label	Prop	Type	Description
HTTP / Webhook	`http`	`app`	This component uses the HTTP / Webhook app.
Watching timer	`timer`	`$.interface.timer`	How often to watch the URL.
HTTP Request Configuration	`httpRequest`	`http_request`	HTTP Request Configuration
Emit body only	`emitBodyOnly`	`boolean`	If set as true the emitted item will contain only the response body, otherwise, it will include the request status code.
Emit as array	`emitAsArray`	`boolean`	If the request responds with an array, this source will emit changes individually for each item of the array.

Trigger Authentication#

The HTTP / Webhook API does not require authentication.

About HTTP / Webhook#

Get a unique URL where you can send HTTP or webhook requests

Action#

Send Message on Quriiri

Description:Sends an SMS message using the Quriiri API. [See the documentation](https://docs.quriiri.fi/docs/quriiri/send-sms/operations/create-a)

Version:0.0.1

Key:quriiri-send-message

View on GitHub

Action Code#

import { ConfigurationError } from "@pipedream/platform";
import {
  DR_TYPE_OPTIONS,
  SENDER_TYPE_OPTIONS,
} from "../../common/constants.mjs";
import quriiri from "../../quriiri.app.mjs";

export default {
  key: "quriiri-send-message",
  name: "Send Message",
  description: "Sends an SMS message using the Quriiri API. [See the documentation](https://docs.quriiri.fi/docs/quriiri/send-sms/operations/create-a)",
  version: "0.0.1",
  type: "action",
  props: {
    quriiri,
    sender: {
      type: "string",
      label: "Sender",
      description: "Message sender. International numbers with + or 00 prefix and 5 to 15 numbers following it, national ones / shortcodes with 1 to 15 numbers, alphanumeric with max 11 characters. Although other characters may work, we cannot guarantee it and recommend restricting the characters used in alphanumeric senders to letters A-Z and a-z, and digits 0-9.",
      optional: true,
    },
    senderType: {
      type: "string",
      label: "Sender Type",
      description: "Sender type. If missing, an attempt is made to guess one from the sender, and guess failure results in an error.",
      options: SENDER_TYPE_OPTIONS,
      optional: true,
    },
    destination: {
      type: "string",
      label: "Destination",
      description: "Message destination number in international or national format. International numbers should begin with + or 00 prefix and national format numbers will be converted to Finnish ones. For maximum reliability, we recommend using only international format numbers, with nothing but digits following the international prefix. The HTTP response contains information about which international number each accepted destination was converted to or treated as. Accepts multiple values array in JSON, set multiple times with form POST and GET.",
    },
    text: {
      type: "string",
      label: "Text",
      description: "Message text. Based on the text, the service automatically determines whether the message can be sent using the GSM character set or if sending it as Unicode is required. Also, the service determines automatically how many SMS messages sending the message will require. The general rule of thumb is that the first SMS using the GSM character set can hold up to 160 characters; if there are more, concatenation is required and each SMS (including the first one) can hold up to 153 characters. Note that some characters in the GSM character set will consume two characters instead of one. For Unicode, the corresponding numbers are 70 and 67. If text is provided, data is ignored. Message templates can be used by finding the template ID from the UI and using {template_ID} placeholder, e.g. \"Hello ${template_361}!\"",
      optional: true,
    },
    data: {
      type: "string",
      label: "Data",
      description: "Binary message data, bytes encoded as hexadecimal characters. If text is provided, data is ignored. Maximum number of bytes in udh and data combined is 140.",
      optional: true,
    },
    udh: {
      type: "string",
      label: "UDH",
      description: "User data header, bytes encoded as hexadecimal characters. Maximum number of bytes in udh and data combined is 140. Note that concatenated text messages may be sent using the entire message context in the text parameter, without setting udh, and the service will take care of splitting the message into appropriately sized parts.",
      optional: true,
    },
    batchId: {
      type: "string",
      label: "Batch ID",
      description: "Batch ID, max 255 characters. Used to group interrelated messages, for example if some special actions should be taken to a group of separately sent but logically related messages. Under normal circumstances, the service does not use this parameter but just relays it back in corresponding delivery reports.",
      optional: true,
    },
    billingRef: {
      type: "string",
      label: "Billing Reference",
      description: "Billing reference, max 255 characters. This is solely for the API user, the service does not do anything else with it besides relaying it back in corresponding delivery reports.",
      optional: true,
    },
    drUrl: {
      type: "string",
      label: "Delivery Receipt URL",
      description: "Delivery report URL. URL where to relay delivery reports",
      optional: true,
    },
    drType: {
      type: "string",
      label: "Delivery Receipt Type",
      description: "Delivery report type. Similarly as for supported API request types. Defaults to the format of the API request.",
      options: DR_TYPE_OPTIONS,
      optional: true,
    },
    flash: {
      type: "boolean",
      label: "Flash",
      description: "Send a \"flash\" SMS if set to true.",
      optional: true,
    },
    validity: {
      type: "integer",
      label: "Validity",
      description: "Validity period of the message in minutes. If not set, defaults to the value set in your account details.",
      min: 1,
      max: 32767,
      optional: true,
    },
    scheduleTime: {
      type: "string",
      label: "Schedule Time",
      description: "Schedule time can be used for message scheduling. If a message is scheduled, the API response contains messageid for later message cancellation, if needed. Schedule time must be set in `RFC 3339` format, ie. `2020-05-31T04:20:03Z`. In scheduling the seconds and milliseconds are ignored, so every scheduled message is sent in a resolution of minutes.",
      optional: true,
    },
  },
  async run({ $ }) {
    if (!this.text && !this.data) {
      throw new ConfigurationError("You must provide either 'Data' or 'Text' input.");
    }
    const response = await this.quriiri.sendSms({
      $,
      data: {
        sender: this.sender,
        destinations: this.destination,
        text: this.text,
        sendertype: this.senderType,
        data: this.data,
        udh: this.udh,
        batchid: this.batchId,
        billingref: this.billingRef,
        drurl: this.drUrl,
        drtype: this.drType,
        flash: this.flash,
        validity: this.validity,
        scheduletime: this.scheduleTime,
      },
    });
    $.export("$summary", `Message sent successfully to ${this.destination}`);
    return response;
  },
};

Action Configuration#

This component may be configured based on the props defined in the component code. Pipedream automatically prompts for input values in the UI.

Label	Prop	Type	Description
Quriiri	`quriiri`	`app`	This component uses the Quriiri app.
Sender	`sender`	`string`	Message sender. International numbers with + or 00 prefix and 5 to 15 numbers following it, national ones / shortcodes with 1 to 15 numbers, alphanumeric with max 11 characters. Although other characters may work, we cannot guarantee it and recommend restricting the characters used in alphanumeric senders to letters A-Z and a-z, and digits 0-9.
Sender Type	`senderType`	`string`	Select a value from the drop down menu:`{ "label": "International Number", "value": "MSISDN" }{ "label": "National Number / Shortcode", "value": "NATIONAL" }{ "label": "alphanumeric", "value": "ALNUM" }`
Destination	`destination`	`string`	Message destination number in international or national format. International numbers should begin with + or 00 prefix and national format numbers will be converted to Finnish ones. For maximum reliability, we recommend using only international format numbers, with nothing but digits following the international prefix. The HTTP response contains information about which international number each accepted destination was converted to or treated as. Accepts multiple values array in JSON, set multiple times with form POST and GET.
Text	`text`	`string`	Message text. Based on the text, the service automatically determines whether the message can be sent using the GSM character set or if sending it as Unicode is required. Also, the service determines automatically how many SMS messages sending the message will require. The general rule of thumb is that the first SMS using the GSM character set can hold up to 160 characters; if there are more, concatenation is required and each SMS (including the first one) can hold up to 153 characters. Note that some characters in the GSM character set will consume two characters instead of one. For Unicode, the corresponding numbers are 70 and 67. If text is provided, data is ignored. Message templates can be used by finding the template ID from the UI and using {template_ID} placeholder, e.g. "Hello ${template_361}!"
Data	`data`	`string`	Binary message data, bytes encoded as hexadecimal characters. If text is provided, data is ignored. Maximum number of bytes in udh and data combined is 140.
UDH	`udh`	`string`	User data header, bytes encoded as hexadecimal characters. Maximum number of bytes in udh and data combined is 140. Note that concatenated text messages may be sent using the entire message context in the text parameter, without setting udh, and the service will take care of splitting the message into appropriately sized parts.
Batch ID	`batchId`	`string`	Batch ID, max 255 characters. Used to group interrelated messages, for example if some special actions should be taken to a group of separately sent but logically related messages. Under normal circumstances, the service does not use this parameter but just relays it back in corresponding delivery reports.
Billing Reference	`billingRef`	`string`	Billing reference, max 255 characters. This is solely for the API user, the service does not do anything else with it besides relaying it back in corresponding delivery reports.
Delivery Receipt URL	`drUrl`	`string`	Delivery report URL. URL where to relay delivery reports
Delivery Receipt Type	`drType`	`string`	Select a value from the drop down menu:`JSONPOSTGET`
Flash	`flash`	`boolean`	Send a "flash" SMS if set to true.
Validity	`validity`	`integer`	Validity period of the message in minutes. If not set, defaults to the value set in your account details.
Schedule Time	`scheduleTime`	`string`	Schedule time can be used for message scheduling. If a message is scheduled, the API response contains messageid for later message cancellation, if needed. Schedule time must be set in `RFC 3339` format, ie. `2020-05-31T04:20:03Z`. In scheduling the seconds and milliseconds are ignored, so every scheduled message is sent in a resolution of minutes.

Action Authentication#

Quriiri uses API keys for authentication. When you connect your Quriiri account, Pipedream securely stores the keys so you can easily authenticate to Quriiri APIs in both code and no-code steps.

To retrieve your API Key and API URL,

Navigate to your Quriiri account and sign in
Go to “Management” > “Integrations” > “Pipedream”
Click "Connect"

About Quriiri#

Quriiri is the industry's leading domestic communication platform that helps you connect with your customers.

More Ways to Connect Quriiri + HTTP / Webhook#

Other Popular Integrations#

Send Message with Quriiri API on New Requests (Payload Only) from HTTP / Webhook API

HTTP / Webhook + Quriiri

Try it

Send Message with Quriiri API on New Requests from HTTP / Webhook API

HTTP / Webhook + Quriiri

Try it

Popular Triggers#

New Requests from the HTTP / Webhook API

Get a URL and emit the full HTTP event on every request (including headers and query parameters). You can also configure the HTTP response code, body, and more.

Try it

New Requests (Payload Only) from the HTTP / Webhook API

Get a URL and emit the HTTP body as an event on every request

Try it

New event when the content of the URL changes. from the HTTP / Webhook API

Emit new event when the content of the URL changes.

Try it