Diabatix ColdStream

New generation of generative design software for thermal & flow topology optimization for optimal heat sink design

Integrate the Diabatix ColdStream API with the HTTP / Webhook API

Setup the Diabatix ColdStream API trigger to run a workflow which integrates with the HTTP / Webhook API. Pipedream's integration platform allows you to integrate Diabatix ColdStream and HTTP / Webhook remarkably fast. Free for developers.

Trusted by 1,000,000+ developers from startups to Fortune 500 companies

Adyen logo
Appcues logo
Bandwidth logo
Checkr logo
ChartMogul logo
Dataminr logo
Gopuff logo
Gorgias logo
LinkedIn logo
Logitech logo
Replicated logo
Rudderstack logo
SAS logo
Scale AI logo
Webflow logo
Warner Bros. logo
Adyen logo
Appcues logo
Bandwidth logo
Checkr logo
ChartMogul logo
Dataminr logo
Gopuff logo
Gorgias logo
LinkedIn logo
Logitech logo
Replicated logo
Rudderstack logo
SAS logo
Scale AI logo
Webflow logo
Warner Bros. logo
Fetch Simulation Results with Diabatix ColdStream API on New Requests from HTTP / Webhook API
HTTP / Webhook + Diabatix ColdStream
 
Try it
Run Simulation with Diabatix ColdStream API on New Requests from HTTP / Webhook API
HTTP / Webhook + Diabatix ColdStream
 
Try it
Update Project in ColdStream with Diabatix ColdStream API on New Requests from HTTP / Webhook API
HTTP / Webhook + Diabatix ColdStream
 
Try it
Fetch Simulation Results with Diabatix ColdStream API on New Requests (Payload Only) from HTTP / Webhook API
HTTP / Webhook + Diabatix ColdStream
 
Try it
Run Simulation with Diabatix ColdStream API on New Requests (Payload Only) from HTTP / Webhook API
HTTP / Webhook + Diabatix ColdStream
 
Try it
New Requests from the HTTP / Webhook API

Get a URL and emit the full HTTP event on every request (including headers and query parameters). You can also configure the HTTP response code, body, and more.

 
Try it
New Project Upgraded from the Diabatix ColdStream API

Emit new event when a specific project has been upgraded or edited in ColdStream.

 
Try it
New Requests (Payload Only) from the HTTP / Webhook API

Get a URL and emit the HTTP body as an event on every request

 
Try it
New Simulation Completed from the Diabatix ColdStream API

Emit new event when a simulation has been successfully completed.

 
Try it
New event when the content of the URL changes. from the HTTP / Webhook API

Emit new event when the content of the URL changes.

 
Try it
Fetch Simulation Results with the Diabatix ColdStream API

Retrieves the result of a specific simulation from ColdStream. See the documentation

 
Try it
Send any HTTP Request with the HTTP / Webhook API

Send an HTTP request using any method and URL. Optionally configure query string parameters, headers, and basic auth.

 
Try it
Run Simulation with the Diabatix ColdStream API

Starts a new simulation in ColdStream with specified parameters and submits the created case. See the documentation

 
Try it
Send GET Request with the HTTP / Webhook API

Send an HTTP GET request to any URL. Optionally configure query string parameters, headers and basic auth.

 
Try it
Update Project in ColdStream with the Diabatix ColdStream API

Updates an existing project with new parameters or data in ColdStream. See the documentation

 
Try it

Overview of Diabatix ColdStream

The Diabatix ColdStream API provides automated thermal analysis capabilities, allowing users to streamline the cooling design process for various components and devices. With this API, you can automate the design of thermal systems, optimize existing cooling solutions, and simulate different scenarios to find the most effective thermal management strategy. In Pipedream, you can leverage this API to build automated workflows that integrate thermal analysis into your engineering cycles, ensuring your designs meet the necessary thermal specifications before physical prototypes are ever built.

Connect Diabatix ColdStream

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
import { axios } from "@pipedream/platform"
export default defineComponent({
  props: {
    diabatix_coldstream: {
      type: "app",
      app: "diabatix_coldstream",
    }
  },
  async run({steps, $}) {
    return await axios($, {
      url: `https://identity.coldstream.diabatix.com/users/me`,
      headers: {
        Authorization: `Bearer ${this.diabatix_coldstream.$auth.access_token}`,
        "accept": `application/json`,
      },
    })
  },
})

Overview of HTTP / Webhook

Build, test, and send HTTP requests without code using your Pipedream workflows. The HTTP / Webhook action is a tool to build HTTP requests with a Postman-like graphical interface.

An interface for configuring an HTTP request within Pipedream's workflow system. The current selection is a GET request with fields for the request URL, authorization type (set to 'None' with a note explaining "This request does not use authorization"), parameters, headers (with a count of 1, though the detail is not visible), and body. Below the main configuration area is an option to "Include Response Headers," and a button labeled "Configure to test." The overall layout suggests a user-friendly, no-code approach to setting up custom HTTP requests.

Point and click HTTP requests

Define the target URL, HTTP verb, headers, query parameters, and payload body without writing custom code.

A screenshot of Pipedream's HTTP Request Configuration interface with a GET request type selected. The request URL is set to 'https://api.openai.com/v1/models'. The 'Auth' tab is highlighted, indicating that authentication is required for this request. In the headers section, there are two headers configured: 'User-Agent' is set to 'pipedream/1', and 'Authorization' is set to 'Bearer {{openai_api_key}}', showing how the OpenAI account's API key is dynamically inserted into the headers to handle authentication automatically.

Here's an example workflow that uses the HTTP / Webhook action to send an authenticated API request to OpenAI.

Focus on integrating, not authenticating

This action can also use your connected accounts with third-party APIs. Selecting an integrated app will automatically update the request’s headers to authenticate with the app properly, and even inject your token dynamically.

This GIF depicts the process of selecting an application within Pipedream's HTTP Request Builder. A user hovers the cursor over the 'Auth' tab and clicks on a dropdown menu labeled 'Authorization Type', then scrolls through a list of applications to choose from for authorization purposes. The interface provides a streamlined and intuitive method for users to authenticate their HTTP requests by selecting the relevant app in the configuration settings.

Pipedream integrates with thousands of APIs, but if you can’t find a Pipedream integration simply use Environment Variables in your request headers to authenticate with.

Compatible with no code actions or Node.js and Python

The HTTP/Webhook action exports HTTP response data for use in subsequent workflow steps, enabling easy data transformation, further API calls, database storage, and more.

Response data is available for both coded (Node.js, Python) and no-code steps within your workflow.

An image showing the Pipedream interface where the HTTP Webhook action has returned response data as a step export. The interface highlights a structured view of the returned data with collapsible sections. We can see 'steps.custom_request1' expanded to show 'return_value' which is an object containing a 'list'. Inside the list, an item 'data' is expanded to reveal an element with an 'id' of 'whisper-1', indicating a model created by and owned by 'openai-internal'. Options to 'Copy Path' and 'Copy Value' are available for easy access to the data points.

Connect HTTP / Webhook

1
2
3
4
5
6
7
8
9
10
11
12
13
// To use any npm package on Pipedream, just import it
import axios from "axios"

export default defineComponent({
  async run({ steps, $ }) {
    const { data } = await axios({
      method: "GET",
      url: "https://pokeapi.co/api/v2/pokemon/charizard",
    })
    return data.species
  },
})

Community Posts

A Look at Pipedream
A Look at Pipedream
I'm going to build a workflow that will search Twitter every hour for a keyword. It will take the results, format them nicely, and then email it.
Building a Traffic-Based Workflow in Pipedream
Building a Traffic-Based Workflow in Pipedream
Normally I don't like to blog about stuff that isn't generally available to all, but as it will be available sometime soon, I decided to go ahead anyway. And I built something really cool I want to share so that's another reason to talk about this now!

Trusted by 1,000,000+ developers from startups to Fortune 500 companies

Adyen logo
Appcues logo
Bandwidth logo
Checkr logo
ChartMogul logo
Dataminr logo
Gopuff logo
Gorgias logo
LinkedIn logo
Logitech logo
Replicated logo
Rudderstack logo
SAS logo
Scale AI logo
Webflow logo
Warner Bros. logo
Adyen logo
Appcues logo
Bandwidth logo
Checkr logo
ChartMogul logo
Dataminr logo
Gopuff logo
Gorgias logo
LinkedIn logo
Logitech logo
Replicated logo
Rudderstack logo
SAS logo
Scale AI logo
Webflow logo
Warner Bros. logo