Request Task with Runware API on New Message In Channels (Instant) from Slack API

Pipedream makes it easy to connect APIs for Runware, Slack and 2,400+ other apps remarkably fast.

Trigger workflow on

New Message In Channels (Instant) from the Slack API

Next, do this

Request Task with the Runware API

No credit card required

▶

Watch us build a workflow

8 min

Watch now ➜

Trusted by 1,000,000+ developers from startups to Fortune 500 companies

Developers ♥ Pipedream

Getting Started#

This integration creates a workflow with a Slack trigger and Runware action. When you configure and deploy the workflow, it will run on Pipedream's servers 24x7 for free.

Select this integration
Configure the New Message In Channels (Instant) trigger
1. Connect your Slack account
2. Optional- Select one or more Channels
3. Configure slackApphook
4. Optional- Configure Resolve Names
5. Optional- Configure Ignore Bots
6. Optional- Configure Ignore replies in threads
Configure the Request Task action
1. Connect your Runware account
2. Select a Task Type
3. Optional- Select a Output Type
4. Optional- Select a Output Format
5. Optional- Configure Upload Endpoint
6. Optional- Configure Check NSFW
7. Optional- Configure Include Cost
8. Configure Positive Prompt
9. Optional- Configure Negative Prompt
10. Optional- Configure Seed Image
11. Optional- Configure Mask Image
12. Optional- Configure Strength
13. Configure Height
14. Configure Width
15. Configure Model
16. Optional- Configure Steps
17. Optional- Configure Scheduler
18. Optional- Configure Seed
19. Optional- Configure Number Of Results
Deploy the workflow
Send a test event to validate your setup
Turn on the trigger

Details#

This integration uses pre-built, source-available components from Pipedream's GitHub repo. These components are developed by Pipedream and the community, and verified and maintained by Pipedream.

To contribute an update to an existing component or create a new component, create a PR on GitHub. If you're new to Pipedream component development, you can start with quickstarts for trigger span and action development, and then review the component API reference.

Trigger#

New Message In Channels (Instant) on Slack

Description:Emit new event when a new message is posted to one or more channels

Version:1.0.22

Key:slack-new-message-in-channels

View on GitHub

Slack Overview#

The Pipedream Slack app enables you to build event-driven workflows that interact with the Slack API. Once you authorize the Pipedream app's access to your workspace, you can use Pipedream workflows to perform common Slack actions or write your own code against the Slack API.

The Pipedream Slack app is not a typical app. You don't interact with it directly as a bot, and it doesn't add custom functionality to your workspace out of the box. It makes it easier to automate anything you'd typically use the Slack API for, using Pipedream workflows.

Automate posting updates to your team channels
Create a bot to answer common questions
Integrate with your existing tools and services
And much more!

Trigger Code#

import common from "../common/base.mjs";
import constants from "../common/constants.mjs";
import sampleEmit from "./test-event.mjs";

export default {
  ...common,
  key: "slack-new-message-in-channels",
  name: "New Message In Channels (Instant)",
  version: "1.0.22",
  description: "Emit new event when a new message is posted to one or more channels",
  type: "source",
  dedupe: "unique",
  props: {
    ...common.props,
    conversations: {
      propDefinition: [
        common.props.slack,
        "conversation",
      ],
      type: "string[]",
      label: "Channels",
      description: "Select one or more channels to monitor for new messages.",
      optional: true,
    },
    // eslint-disable-next-line pipedream/props-description,pipedream/props-label
    slackApphook: {
      type: "$.interface.apphook",
      appProp: "slack",
      async eventNames() {
        return this.conversations || [
          "message",
        ];
      },
    },
    resolveNames: {
      propDefinition: [
        common.props.slack,
        "resolveNames",
      ],
    },
    ignoreBot: {
      propDefinition: [
        common.props.slack,
        "ignoreBot",
      ],
    },
    ignoreThreads: {
      type: "boolean",
      label: "Ignore replies in threads",
      description: "Ignore replies to messages in threads",
      optional: true,
    },
  },
  methods: {
    ...common.methods,
    getSummary() {
      return "New message in channel";
    },
    async processEvent(event) {
      if (event.type !== "message") {
        console.log(`Ignoring event with unexpected type "${event.type}"`);
        return;
      }
      if (event.subtype && !constants.ALLOWED_MESSAGE_IN_CHANNEL_SUBTYPES.includes(event.subtype)) {
        // This source is designed to just emit an event for each new message received.
        // Due to inconsistencies with the shape of message_changed and message_deleted
        // events, we are ignoring them for now. If you want to handle these types of
        // events, feel free to change this code!!
        console.log("Ignoring message with subtype.");
        return;
      }
      if ((this.ignoreBot) && (event.subtype == "bot_message" || event.bot_id)) {
        return;
      }
      // There is no thread message type only the thread_ts field
      // indicates if the message is part of a thread in the event.
      if (this.ignoreThreads && event.thread_ts) {
        console.log("Ignoring reply in thread");
        return;
      }
      if (this.resolveNames) {
        if (event.user) {
          event.user_id = event.user;
          event.user = await this.getUserName(event.user);
        } else if (event.bot_id) {
          event.bot = await this.getBotName(event.bot_id);
        }
        event.channel_id = event.channel;
        event.channel = await this.getConversationName(event.channel);
        if (event.team) {
          event.team_id = event.team;
          event.team = await this.getTeamName(event.team);
        }
      }
      return event;
    },
  },
  sampleEmit,
};

Trigger Configuration#

This component may be configured based on the props defined in the component code. Pipedream automatically prompts for input values in the UI and CLI.

Label	Prop	Type	Description
Slack	`slack`	`app`	This component uses the Slack app.
N/A	`db`	`$.service.db`	This component uses `$.service.db` to maintain state between executions.
Channels	`conversations`	`string[]`	Select a value from the drop down menu.
	`slackApphook`	`$.interface.apphook`
Resolve Names	`resolveNames`	`boolean`	Instead of returning `channel`, `team`, and `user` as IDs, return their human-readable names.
Ignore Bots	`ignoreBot`	`boolean`	Ignore messages from bots
Ignore replies in threads	`ignoreThreads`	`boolean`	Ignore replies to messages in threads

Trigger Authentication#

Slack uses OAuth authentication. When you connect your Slack account, Pipedream will open a popup window where you can sign into Slack and grant Pipedream permission to connect to your account. Pipedream securely stores and automatically refreshes the OAuth tokens so you can easily authenticate any Slack API.

Pipedream requests the following authorization scopes when you connect your account:

bookmarks:writecalls:readcalls:writechannels:historychannels:readchannels:writednd:readdnd:writeemoji:readfiles:readgroups:historygroups:readgroups:writeim:historyim:readim:writelinks:readlinks:writempim:historympim:readmpim:writepins:readpins:writereactions:readreactions:writereminders:readreminders:writeremote_files:readremote_files:sharestars:readstars:writeteam:readusergroups:readusergroups:writeusers:readusers:read.emailusers:writechat:write:botchat:write:usercommandsfiles:write:userusers.profile:writeusers.profile:readsearch:read

About Slack#

Slack is a channel-based messaging platform. With Slack, people can work together more effectively, connect all their software tools and services, and find the information they need to do their best work — all within a secure, enterprise-grade environment.

Action#

Request Task on Runware

Description:Request one task to be processed by the Runware API. [See the documentation](https://docs.runware.ai/en/image-inference/api-reference).

Version:0.0.1

Key:runware-request-task

View on GitHub

Action Code#

import { v4 as uuid } from "uuid";
import app from "../../runware.app.mjs";

export default {
  key: "runware-request-task",
  name: "Request Task",
  description: "Request one task to be processed by the Runware API. [See the documentation](https://docs.runware.ai/en/image-inference/api-reference).",
  version: "0.0.1",
  type: "action",
  props: {
    app,
    taskType: {
      propDefinition: [
        app,
        "taskType",
      ],
    },
    outputType: {
      propDefinition: [
        app,
        "outputType",
      ],
    },
    outputFormat: {
      propDefinition: [
        app,
        "outputFormat",
      ],
    },
    uploadEndpoint: {
      propDefinition: [
        app,
        "uploadEndpoint",
      ],
    },
    checkNSFW: {
      propDefinition: [
        app,
        "checkNSFW",
      ],
    },
    includeCost: {
      propDefinition: [
        app,
        "includeCost",
      ],
    },
    positivePrompt: {
      propDefinition: [
        app,
        "positivePrompt",
      ],
    },
    negativePrompt: {
      propDefinition: [
        app,
        "negativePrompt",
      ],
    },
    seedImage: {
      propDefinition: [
        app,
        "seedImage",
      ],
    },
    maskImage: {
      propDefinition: [
        app,
        "maskImage",
      ],
    },
    strength: {
      propDefinition: [
        app,
        "strength",
      ],
    },
    height: {
      propDefinition: [
        app,
        "height",
      ],
    },
    width: {
      propDefinition: [
        app,
        "width",
      ],
    },
    model: {
      propDefinition: [
        app,
        "model",
      ],
    },
    steps: {
      propDefinition: [
        app,
        "steps",
      ],
    },
    scheduler: {
      propDefinition: [
        app,
        "scheduler",
      ],
    },
    seed: {
      propDefinition: [
        app,
        "seed",
      ],
    },
    numberResults: {
      propDefinition: [
        app,
        "numberResults",
      ],
    },
  },
  async run({ $ }) {
    const {
      app,
      taskType,
      outputType,
      outputFormat,
      uploadEndpoint,
      checkNSFW,
      includeCost,
      positivePrompt,
      negativePrompt,
      seedImage,
      maskImage,
      strength,
      height,
      width,
      model,
      steps,
      scheduler,
      seed,
      numberResults,
    } = this;

    const response = await app.post({
      $,
      data: [
        {
          taskUUID: uuid(),
          taskType,
          outputType,
          outputFormat,
          uploadEndpoint,
          checkNSFW,
          includeCost,
          positivePrompt,
          negativePrompt,
          seedImage,
          maskImage,
          strength,
          height,
          width,
          model,
          steps,
          scheduler,
          seed: seed
            ? parseInt(seed)
            : undefined,
          numberResults,
        },
      ],
    });

    $.export("$summary", `Successfully requested task with UUID \`${response.data[0].taskUUID}\`.`);
    return response;
  },
};

Action Configuration#

This component may be configured based on the props defined in the component code. Pipedream automatically prompts for input values in the UI.

Label	Prop	Type	Description
Runware	`app`	`app`	This component uses the Runware app.
Task Type	`taskType`	`string`	Select a value from the drop down menu:`{ "value": "imageInference", "label": "Image Inference" }{ "value": "imageControlNetPreProcess", "label": "Image Control Net Preprocess" }{ "value": "imageUpscale", "label": "Image Upscale" }{ "value": "imageBackgroundRemoval", "label": "Image Background Removal" }{ "value": "imageCaption", "label": "Image Caption" }{ "value": "promptEnhance", "label": "Prompt Enhance" }`
Output Type	`outputType`	`string`	Select a value from the drop down menu:`base64DatadataURIURL`
Output Format	`outputFormat`	`string`	Select a value from the drop down menu:`PNGJPGWEBP`
Upload Endpoint	`uploadEndpoint`	`string`	This parameter allows you to specify a URL to which the generated image will be uploaded as binary image data using the HTTP PUT method. For example, an S3 bucket URL can be used as the upload endpoint. When the image is ready, it will be uploaded to the specified URL.
Check NSFW	`checkNSFW`	`boolean`	This parameter is used to enable or disable the NSFW check. When enabled, the API will check if the image contains NSFW (not safe for work) content. This check is done using a pre-trained model that detects adult content in images. When the check is enabled, the API will return `NSFWContent: true` in the response object if the image is flagged as potentially sensitive content. If the image is not flagged, the API will return `NSFWContent: false`. If this parameter is not used, the parameter `NSFWContent` will not be included in the response object. Adds `0.1` seconds to image inference time and incurs additional costs. The NSFW filter occasionally returns false positives and very rarely false negatives.
Include Cost	`includeCost`	`boolean`	If set to `true`, the cost to perform the task will be included in the response object. Defaults to `false`.
Positive Prompt	`positivePrompt`	`string`	A positive prompt is a text instruction to guide the model on generating the image. It is usually a sentence or a paragraph that provides positive guidance for the task. This parameter is essential to shape the desired results. For example, if the positive prompt is `dragon drinking coffee`, the model will generate an image of a dragon drinking coffee. The more detailed the prompt, the more accurate the results. The length of the prompt must be between 4 and 2000 characters.
Negative Prompt	`negativePrompt`	`string`	A negative prompt is a text instruction to guide the model on generating the image. It is usually a sentence or a paragraph that provides negative guidance for the task. This parameter helps to avoid certain undesired results. For example, if the negative prompt is `red dragon, cup`, the model will follow the positive prompt but will avoid generating an image of a red dragon or including a cup. The more detailed the prompt, the more accurate the results. The length of the prompt must be between 4 and 2000 characters.
Seed Image	`seedImage`	`string`	When doing Image-to-Image, Inpainting or Outpainting, this parameter is required. Specifies the seed image to be used for the diffusion process. The image can be specified in one of the following formats: An UUID v4 string of a previously uploaded image or a generated image. A data URI string representing the image. The data URI must be in the format `data:<mediaType>;base64,` followed by the base64-encoded image. For example: `data:image/png;base64,iVBORw0KGgo...`. A base64 encoded image without the data URI prefix. For example: `iVBORw0KGgo...`. A URL pointing to the image. The image must be accessible publicly. Supported formats are: PNG, JPG and WEBP.
Mask Image	`maskImage`	`string`	When doing Inpainting or Outpainting, this parameter is required. Specifies the mask image to be used for the inpainting process. The image can be specified in one of the following formats: An UUID v4 string of a previously uploaded image or a generated image. A data URI string representing the image. The data URI must be in the format `data:<mediaType>;base64,` followed by the base64-encoded image. For example: `data:image/png;base64,iVBORw0KGgo...`. A base64 encoded image without the data URI prefix. For example: `iVBORw0KGgo...`. A URL pointing to the image. The image must be accessible publicly. Supported formats are: PNG, JPG and WEBP.
Strength	`strength`	`string`	When doing Image-to-Image, Inpainting or Outpainting, this parameter is used to determine the influence of the Seed Image image in the generated output. A higher value results in more influence from the original image, while a lower value allows more creative deviation. Min: `0` Max: `1` and Default: `0.8`.
Height	`height`	`integer`	Used to define the height dimension of the generated image. Certain models perform better with specific dimensions. The value must be divisible by 64, eg: `512`, `576`, `640` ... `2048`.
Width	`width`	`integer`	Used to define the width dimension of the generated image. Certain models perform better with specific dimensions. The value must be divisible by 64, eg: `512`, `576`, `640` ... `2048`.
Model	`model`	`string`	This identifier is a unique string that represents a specific model. You can find the AIR identifier of the model you want to use in our Model Explorer, which is a tool that allows you to search for models based on their characteristics. More information about the AIR system can be found in the Models page. Eg. `civitai:78605@83390`.
Steps	`steps`	`integer`	The number of steps is the number of iterations the model will perform to generate the image. The higher the number of steps, the more detailed the image will be. However, increasing the number of steps will also increase the time it takes to generate the image and may not always result in a better image (some schedulers work differently). When using your own models you can specify a new default value for the number of steps. Defaults to `20`.
Scheduler	`scheduler`	`string`	An scheduler is a component that manages the inference process. Different schedulers can be used to achieve different results like more detailed images, faster inference, or more accurate results. The default scheduler is the one that the model was trained with, but you can choose a different one to get different results. Schedulers are explained in more detail in the Schedulers page.
Seed	`seed`	`string`	A seed is a value used to randomize the image generation. If you want to make images reproducible (generate the same image multiple times), you can use the same seed value. When requesting multiple images with the same seed, the seed will be incremented by 1 (+1) for each image generated. Min: `0` Max: `9223372036854776000`. Defaults to `Random`.
Number Of Results	`numberResults`	`integer`	The number of images to generate from the specified prompt. If Seed is set, it will be incremented by 1 (+1) for each image generated.

Request Task with Runware API on New Message In Channels (Instant) from Slack API

Pipedream makes it easy to connect APIs for Runware, Slack and 2,400+ other apps remarkably fast.

Trusted by 1,000,000+ developers from startups to Fortune 500 companies

Developers ♥ Pipedream

1-24of2,400+apps by most popular

1
-
24
of
2,400+
apps by most popular